Different models of refrigerators or freezers have different failed Samsung refrigerator problem codes. An integrated self-diagnostic error identification system is a feature of more recent Samsung refrigerator and freezer models. The system will display an error code or message that is simple to read and understand if it notices a problem with the machine.
Because each error number on a Samsung refrigerator is distinct, you can quickly locate the cause of any problems and correct them. The error codes are frequently caused by leaving the refrigerator door open too long.
They can also be the result of something as straightforward as a power outage. You will discover how to troubleshoot and resolve some of the most typical Samsung refrigerator problem codes throughout this article.
Common Samsung refrigerator error codes and how to resolve them
The error code’s only minor cause is typically the malfunction. As a result, even when an error code is displayed, the refrigerator might still function as it should. However, unless it is part of the cure, it is not recommended to unplug the refrigerator in an effort to clear the error code.
The techniques listed below will assist you in troubleshooting and resolving the issue with your Samsung refrigerator if it displays an error code so that you can remove it.
OFF/OFF/OFF OFF Samsung Refrigerator Error Code
You can see the error codes OF OF, OFF, or OFF OFF, depending on the model of Samsung refrigerator you own. For the same issue, other models are set to show scrolling temperature bars. The refrigerator is in the Cooling Off Mode, commonly known as the Demo mode, if you receive such an error code.
Problem-solving and Repair
The process for turning off the Demo Mode in Samsung refrigerators differs a little bit depending on the model. In your Samsung refrigerator’s user manual, you may find the particular steps for your model. Most of the time, using the control panel, you can clear the error code.
To do this, simultaneously push and hold the top two buttons on the left side of the refrigerator panel for 5 to 8 seconds. You might also need to push and hold the top button on the right side of the panel on more recent refrigerator models.
If the issue still exists after a few minutes, leave the refrigerator running and examine it again. If it does, simply carry out the method outlined above once more to get rid of it.
Error codes 1E/SE for Samsung refrigerators
A power outage frequently results in Samsung refrigerators displaying the trouble number 1E or SE. Depending on the model, the refrigerator’s display may read SE or 1E.
Press and hold the “Power Save” and “Lighting” buttons simultaneously for around 10 seconds to erase this Samsung refrigerator error code. You can also hold down the Fridge and Freezer buttons at the same time for roughly 10 seconds.
It has been demonstrated that both methods work well for resolving error code SE/1E.
22E/22C Samsung Refrigerator Error Code
The refrigerator evaporator fan has failed if trouble code 22E appears on the refrigerator display. On the other hand, leaving the refrigerator door open for an extended period of time can result in Error Code 22C.
Problem-solving and Repair
You should first unplug the refrigerator from the main power supply outlet if error code 22E is present. The wire harness connections should then be checked for any damage or loose connections. It is best to examine the bracket after it has been opened.
After reattaching any exposed wires, seal the bracket. If this is not the issue, look for any accumulation of ice or frost that might be keeping the fan from turning. Defrost the evaporator fan if it is there to get it running again.
Check the wiring connections to the evaporator fan as well (the gray wire should be inserted in pin1 and orange wire into pin4.)
Check for any loose connections on the connector for the CN76 electronic control board as well. The fan could be dead if these turn out to be fine. To resolve error code 22E in such a situation, the evaporator fan must be changed.
Code 41 E/ PC Error
When there a communication issue between the control panel and the electronic control board, this Samsung refrigerator error code shown. When this happens, the display will either indicate PC Er or Error code 41E, depending on the model of Samsung refrigerator you own.
Fixing and Troubleshooting
Unplug the Samsung refrigerator from the power socket if you receive the 41E or PC ER error number. Remove the top left hinge cover after disconnecting the cable. The wire harness must then disconnected and then reconnected.
Reconnect the refrigerator’s power cord and turn it back on. You should have access to the control panel to fix the problem if the error code has not removed from the display.
85E/85C Samsung Refrigerator Error Code
When the power supply to the compressor is too low, the majority of popular Samsung refrigerator models display the 85 E Samsung error code. Refrigerators with the Samsung Family Hub feature the 85 C trouble code. When the power supply voltage is too low, it activated.
Following a brief power outage, you can experience these error codes.
Fixing and Troubleshooting
You should hire a pro to diagnose and resolve the problem if it not caused by a power outage. If you don’t have the necessary skills, avoid attempting to access your refrigerator’s power source. All you have to do to fix error code 85C or 85E after a power outage is clear the error code from the display.
Play Drive Mad with friends in your free time to relax and have some fun. Try out now for free!